|
TANKS
BARRELS
DEMIJOHNS
FERMENTATION VATS |
| |
|
 |
|
 |
STAINLESS STEEL TANKS |
|
| |
We supply the Algor range of variable capacity and static stainless steel tanks
for their quality finish, fabrication and competitive price. |
| |
 |
All tanks are fabricated in a heavy gauge 304 stainless steel |
|
All fittings supplied with our tanks are manufactured in the higher quality
316 stainless steel. Butterfly valves with BSM outlet are included with all
tanks (except 100 and 200 litre sizes). Other standard fittings such as BSP,
Tri-clover and Tri-clamp are also available |
|
Sterile welding and circular polish ensures easy cleaning for longer
aesthetic presentation of tank |
|
Choice of lids, fixed or variable capacity (VC). VC tank kit includes lid,
silicon seal, reverse valve airlock, stainless steel pump and gauge,
connection hose and clips and lid support davit for tanks
above 1500L capacity |
|
All variable capacity tanks have a reinforced rim to prevent warping |
|
All variable capacity tank lids are manufactured in 316 stainless steel |
|
Sizes available 100 to 25,000 litre |
|
Optional: Upgrade to 316 stainless steel with all tank styles and sizes |
|
Optional: Total drain sump and stainless steel valve on all flat base tanks
less than 1500L |
|
Optional: Sample valve and 3/8" socket weld with all tank styles and sizes |
|
Optional: Volume indicator and 3/8" socket weld with all tank styles and sizes |
|
Optional: Dimple plate on all conical and sloping base tanks, includes an
upgrade to 2.2mm thickness and thermometer |
|
Optional: Marc discharge chute with 40cm round door, available with
conical base tanks only |
|
Optional: Stainless steel stand available with all flat base tanks |
|
Optional: Lid lifting assembly - weld bracket, T-bar on all tanks less than 1500L |
|
Optional: Winch with brake and cable |
|
Optional: Small oval door with all flat base tanks less than 1500L |
|
Optional: Rectangular or round doors on tanks larger than 1500L |
|
Optional: Oval racking door on tanks larger than 1500L |
|
Optional: Welded socket for thermometer |
|
|
|
 |
|
|
TANK RACKING PLATE |
|
| |
|
|
Fully stainless steel |
|
Deep dish design |
|
Inlet below the lip of the dish to allow maximum clean juice flow |
|
Available as standard with 25mm, 38mm, 50mm, 63mm, 75mm
BSM male fittings, alternative fittings available upon request |
|
Dish diameter 280mm as standard, other sizes available on request |
|
|
|
 |
|
|
GARBELLOTTO BARRELS |
|
| |
|
|
Coopered in northern Italy since 1775 |
|
Garbellotto manufacture barrels, casks and open vats |
|
Barrels are available in standard capacities of 225L (barrique), 300L
(hogshead), and 475L (Puncheon). |
|
Casks produced in 1,000 to 20,000 litre sizes |
|
All open vats made to order |
|
All products are manufactured in French oak varieties Allier, Nevers,
Troncais, and Vosges. Garbellotto products are also coopered from
American, Slovenian, Hungarian and central European oaks. |
|
Split oak staves are used exclusively for all 225L, 300L and 475L barrels |
|
All wood is air dried for 2 to 6 years |
|
Light, medium and heavy toasting is available |
|
Renowned for their tight grain construction |
|
Particularly suited to delicate fruit flavor and extended oak maturation
wine styles |
|
|
|
 |
|
|
SECOND HAND BARRELS |
|
| |
|
|
French and American barriques and hogsheads |
|
Re-shaved French and American barriques and hogsheads |
|
50, 100, 150 and 200L fully reconditioned French and American barrels |
|
2.5 to 20 litre port barrels |
|
|
|
 |
|
|
BARREL RACKS |
|
| |
|
|
Manufactured in galvanised steel |
|
Double capacity to suit either 225 or 300 litre barrels |
|
Easy to assemble 4 piece system |
|
Designed to enable fork lift access and allow multi stacking |
|
|
|
 |
|
|
BARREL WASHER/SIPHON |
|
| |
|
|
Fully stainless steel construction |
|
Operates with wash only, wash and siphon or siphon only cycles |
|
Rotating jet spray head to ensure complete coverage of all internal surfaces |
|
13mm BSP male inlet/outlet |
|
No barrel inversion required for cleaning |
|
Vacuum siphon pump to remove all waste from the barrel |
|
3 - 4 minute washing cycle with a 10 - 25 litre per minute flow rate |
|
12V power supply |
|
Can be used with cleaning and sterilising agents |
|
Recommended operating temperature 90°C |
|
Requires operation with a pressure washer |
| |
|
|
|
|
 |
|
|
BARREL FILLING GUN |
|
| |
|
|
Manufactured in stainless steel |
|
Unit available in manual control or automatic stop with level sensor |
|
25mm BSM male inlet, alternative fittings available upon request |
|
Allows perfect fill of any size barrel |
|
Reduces spills and product waste |
|
Easy to clean |
|
|
|
 |
|
|
BARREL RACKING SPEAR |
|
| |
|
|
Fully manufactured in stainless steel |
|
Available in standard lengths of 1.1 metres or made to order |
|
25mm BSM male outlet, alternative fittings available upon request |
|
Bottom of spear designed with 45° angle (no thread) or 19mm BSP
male thread |
|
Optional: Racking plate with adjustable pin, stainless steel construction
19mm BSP female thread |
|
Optional: Sprayball 19mm BSP female thread, 360o coverage, stainless
steel construction, designed to fit into a 50mm bung hole making it ideal for
barrel cleaning |
|
Optional: Plunging plate
(see Section 7: Fermentation Technology for further details) |
|
|
|
 |
|
|
BARREL STIRRER |
|
| |
|
|
4 designs available, curved hand mixer, lees stirrer, straight drill mixers
and curved drill mixers |
|
Body of stirrer manufactured in stainless steel |
|
Design ideal for access to stacked barrels |
|
Unit includes No. 2 silicon bung and handle |
|
|
|
 |
|
|
VALENCHE |
|
| |
|
|
Manufactured in glass, stainless steel or food grade plastic |
|
Straight or curved (for stacked barrels) |
|
3 piece straight plastic units are in lengths of 50, 70 and 100cm with handle |
| |
|
|
|
|
 |
|
|
SILICON AND RUBBER BUNGS AND AIRLOCKS |
|
| |
|
|
Food grade, no taint re-usable silicon bungs available to suit 40mm,50mm,
and 60mm outlets |
|
Food grade rubber bungs available to suit a wide range of demijohns
or barrels |
|
All bungs available in solid form or with a hole suitable for an airlock |
|
Plastic airlocks to fit bored bungs in 3 piece or “S” bend design |
|
50mm cask seals also available. Flush fitting to allow rolling of the barrel,
quick to install, re-usable |
|
|
|
 |
|
|
BARREL TOP UP SYSTEM - STAINLESS STEEL KEGS |
|
| |
|
|
18 litre second hand kegs, with bail covers |
|
45 litre new kegs with 50mm BSP screw bungs |
|
Separate male and female gas and liquid fittings available |
|
Kit includes trolley for easy movement from barrel to barrel, a set of male
and female gas and liquid fittings, filling gun plus 5 meters of gas tubing |
|
Requires operation with gas bottle and regulator |
|
Units are easy to clean and sterilise |
|
|
|
 |
|
|
DEMIJOHNS |
|
| |
|
|
Glass vessels in 5, 10, 15, 20, 25, 34 and 54 litre sizes |
|
Available with a tap and heavy duty plastic woven basket in 12, 17, 23, 28,
34 and 54 litre capacities |
|
All models and sizes include plastic basket and cap |
|
23 litre glass jar |
|
4.5 litre (gallon) glass bottles also available |
|
Optional: Heavy duty plastic woven basket with 54 litre demijohns |
|
|
|
 |
|
|
FERMENTATION VATS |
|
| |
|
|
Vats available in 110, 225, 275, 350, 500, 750, 1,000 and 1,500 litre sizes |
|
Lids are available for the 500, 750 and 1000 litre size vats only |
|
Manufactured in heat resistant food grade polypropylene |
|
Available in burgundy or white plastic |
|
Optional: Tap and straining screen |
|
|
|
 |
|
|
PLASTIC FERMENTER/STORAGE BARRELS |
|
| |
|
|
Available in 25, 50 and 100 litre sizes |
|
Manufactured in food grade polypropylene |
|
Include tap, screw top lid and handles |
|
Also available 200 litre second hand plastic screw cap drums |
|
|
|
|
|
| |
|
